Pneumatic Ball Valve
Pneumatic ball valve is a ball valve with a pneumatic actuator. The pneumatic actuator performs at a relatively fast speed. The fastest switching speed is 0.05 seconds/time, so it is usually called a pneumatic quick cut-off ball valve.
Pneumatic ball valve is a ball valve with a pneumatic actuator. The pneumatic actuator performs at a relatively fast speed. The fastest switching speed is 0.05 seconds/time, so it is usually called a pneumatic quick cut-off ball valve. Pneumatic ball valves are usually equipped with various accessories, such as solenoid valves, gas source treatment triples, limit switches, positioners, control boxes, etc., to achieve local control and long-distance centralized control, and the valve can be controlled in the control room. It does not need to go to the scene or bring manual control at high altitude and danger, which saves human resources and time and safety to a large extent.
10% thicker than general
Pneumatic actuator treated with hardness
Anti-static attached to valve stem and valve body
Steel ball has pressure balancing hole
Passed seal test of German TUV TA-LUFT
Good corrosion resistant
wonderful seal performance
Anti-static Device (Optional)
Double acting /spring return pneumatic actuator
Limit switch ,solenoid valve ,positioner，AFR ,manual override etc accessories （optional）
Pressure Rating：DIN PN16-40/ANSI 150Lb 300Lb/JIS 10K/1000PSI
Connection Type：Thread /SW/BW/clamp ends etc.
DIN 2999-259/ISO 228-1 etc.
Material：WCB、CF8、CF8M 、Super duplex S.S etc.
304, 3 304L, 316L, WCB
316 , Ceramic
PTFE, PPR, Ceramic, Alloy Steel
PN16 / PN25 / PN40
Manual, Pneunatic, Electric
Flange / Wafer
Water/ Gas /Oil /Powder